Good lighting design can completely transform a space. The Disc 3 Long LED Pendant is purposefully pared-back to showcase our decorative shades, with opaque diffusers and a slim tubular design. Available in matt black and satin gold, the three pendants are suspended from a linear ceiling plate on clear Teflon cables that can be adjusted vertically at any time. Each light also has integrated LED technology with dual source illumination for a perfectly balanced glow. Additional glass shades can be purchased and easily installed whenever the mood strikes.
Available in matt black and satin gold to suit modern interiors.
Pared-back design meant to make a feature of decorative shades.
Each suspended light can be adjusted vertically at any time.
Integrated LED compatible with a dimmer switch (switch not included).
Read moreRead less
Specifications
Dimensions
Pendant Height
30cm
Pendant Length
91cm
Pendant Depth
15cm
Flex Length
150cm
Pendant Weight
2.5kg
Materials & Information
Pendant Material: Steel and Aluminium
Flex Material: Clear Teflon Cable
Light Source: Integrated LED
Dimmable: Yes, (Trailing Edge)
Wattage: 27W
IP Rating: IP20
Lumens: 2160LM
Kelvin: 3000K
Glass Shades: Sold Separately
Care & Buying Guide
Clean with a soft dry cloth only.
Always switch off the electricity before cleaning.
Do not use polishing agents, water or abrasive materials when cleaning.
Ensure the dimmer or dimmer system is compatible with Electronics transformers and LED chip on board (COB).
Dimmer switches and systems must dim down to 0 watts, some of our single lights are only 4.8 watts, if the dimmer only dims down to 10 watts for example it will not dim or may flicker.
We understand that our products work with both leading and trailing edge dimmer switches and systems. However, we have been advised that they are better with trailing edge.
Please note dimmer switches and systems that are not compliant to the above points may damage the transformers in our products or not dim the products properly.
Heal's LED ranges are certified to last 30-50,000 hours and most parts can be replaced easily by an electrician, or recycled at the end of their lifespan.
